BCT Program Overview

HVAC Certificates

HVAC GT Degree

Course Descriptions

Required Tools

Textbook Search

Faculty

Related Links

Current Events

IE & Advisory Board

Contact Info

 York Tech Home  |  BCT Homepage | HVAC  Home | Electrical | Carpentry | Plumbing | Building Management | Admissions Info

Required Tool List

Students will be required to bring to labs a basic set of hand tools as listed below. Each student is responsible for keeping up with his/her own tools while using them on campus *(See Below).  

Click Here for a printer friendly tool list. (.pdf file)

Required Tools: (minimum)
 

  Qty              Description
   1                Tool box or bag
   1                Safety Glasses
   1                Gloves

   1                Long sleeve shirt
   1                Medium Flathead Screwdriver
   1                Small Flathead Screwdriver
   1                #2 Phillips Screwdriver
   1                5/16" Nut driver
   1                1/4" Nut driver
   1                Refrigeration Wrench
   1                8" Adjustable Wrench

   1                12" Adjustable Wrench

   1                9/16" Open End Wrench

   1                7/16" Open End Wrench

   1                1/2" Open End Wrench

   1                Allen Wrench Set - Standard
   1                Lineman's Pliers
   1                Needle Nose Pliers
   1                Wire Strippers
   1                Tongue-and-Groove Pliers
   1                Tubing Cutter
   1                1/4", 3/8" Swage Tools
   1                Flaring Tool Set
   1                Scratch Awl

   1                Sheet metal Scriber

   1                Right hand snips
   1                Left hand snips
   1                Straight snips
   1                Tape Measure
   1                Digital Volt/Ohm Meter **See Specs Below
   1                Amp Meter 
 
Recommended Tools:

   1                Mercury or Digital Thermometer
   1                Refrigeration gauges
   1                Hammer
   1                1/2", 5/8", 3/4" Swage Tools

Minimum Meter Specifications:

**The digital multi-meter should be able to handle the following as a minimum:

• 1000VDC

• 750VAC

• 10A AC

• 10A DC

• Resistance up to 20Meg-ohms

• Best if meter is rated at Class III and UL or CSA listed.

* York Technical College is not responsible for any lost, damaged, or stolen tools belonging to any student.

Bryant Electric Supply and Fluke Partnership Programs

Student Vocational Price Breaks!

York Technical College has established Partnerships with Fluke and Klein Tools and it is strongly recommended that the student contact their advisor/instructor for information on these COST SAVING programs PRIOR to purchasing these materials!!

Click Here to See Student Discount Program for Tools and Meters!