BCT Program Overview

BCT GT Degree

Certificate Programs

Course Descriptions

Required Tools

Textbook Search

Faculty

Related Links

Current Events

Contact Info

 York Tech Home  |  BCT Homepage | HVAC  Home | Electrical | Carpentry | Plumbing | Building Management | Admissions Info

Hand Tools

Students enrolled in any of the BCT programs are responsible for supplying their own hand tools. York Technical College is not responsible for any lost, damaged, or stolen tools. * (See Below)

Click Here for a printer friendly tool list. (.pdf file)

Plumbing Tool List -

Toolbox or bag                                               

Safety Glasses (Required for every lab)                  

25 ft tape measure                      

Medium Flathead Screwdriver (1/4” wide blade)             

Small Flathead Screwdriver (3/16” wide blade)

#2 Phillips Screwdriver

1/4 Nutdriver

5/16 Nutdriver                                      

(Note: 6 in 1 screwdriver/Nutdriver can be purchased instead of those mentioned above)

Needle Nose/Side cutting Pliers                            

Lineman's Pliers

Wire Strippers

10” Channel Locks Pliers

12” Pipe Wrench

18” Pipe wrench

Strap Pipe wrench

9/16 Open End Wrench                          

1/2 Open End Wrench

7/16 Open End Wrench

10" Adjustable Wrench                 

Allen Wrench Set (standard, not metric)                                

Hacksaw with blade (24, 32 teeth)                    

Copper Tubing Cutter                            

Tubing cutter for Plastic tubing                       

Pocket/utility knife

2 ft level                                   

Combination (Tri-square) with 6” or 12” rule

Wood chisel (1/2”-1” blade)

Digital Multi-Meter                              

Gloves                                      

Small flashlight                           

Claw Hammer 

* York Technical College is not responsible for any lost, damaged, or stolen tools belonging to any student.